Wednesday 20 June 2012

Traction Engines in the Black Country

Dear Famous Author,
I have not ignored your comment on Anchors Away  but have not  yet heard from the local historian to whom I addressed your query to.  My initial feeling was that the reason for Rees using horses rather than traction engines to move large castings was because that is what they had.  However I have enquired of an eminent Black Country historian whether he is aware of any underlying reason for this situation.
Clydesdale horse at Kinver Fair
By the way, The Bugle report states  These huge horses had the pulling strength of up to two tonnes each and were a common sight on inland waterways....of the Midlands.

On water,  a horse can pull perhaps 50 times the road weight.




Towpath tunnel by Wolverley Lock

 Although Clydesdales are generally smaller than Shire horses I think they are also too large for many of the Midlands canals - particularly the Staffs and Worcs where towpath tunnels can be very low.




This picture from the HorseBoating Society shows the likely size of a canal towing horse.
(Often pairs of donkeys were used in the 18th century.)

2 comments:

  1. Mules were also favoured, tough, hardy and very long lived, 40 yrs or so. Most 'cart horses' would have been of the Welsh cob type with 'heavy horses', Shires, Clydesdales and the smaller Suffolk Punch, used for heavy agricultural work.
    Lesley

    ReplyDelete
  2. Thank youi for your very pertinent comments

    ReplyDelete

Comments will be removed if considered inappropriate